- 2016年6月27日
- 2 分鐘
如何繪製板撿料圖(四)實際繪製板撿料圖
我們知道S1的位置 不知道的朋友請參考如何繪製板檢料圖(二) 我們知道S1的配筋 不知道的朋友請參考如何繪製板檢料圖(三) 現在來開始畫板撿料圖囉! 回憶一下,下圖S1的位置 量測其長度(153x380) S1的配筋 S1的板撿料圖(x向) 首先看支數...
8500
- 2016年6月27日
- 1 分鐘
如何繪製板撿料圖(三)看懂板配筋
通常板配筋會以下圖這種畫法表示 以此圖為例,點狀鋼筋代表短向 線條鋼筋,代表長向 所以此圖,板編號S1,板厚20cm 上層短向#4@10(4號鋼筋間距10cm) 上層長向#4@20(4號鋼筋間距20cm) 下層短向#4@10(4號鋼筋間距10cm)...
3,8310
- 2016年6月27日
- 1 分鐘
如何繪製板撿料圖(二)了解平面圖上的板標示
我們需要知道,平面圖上哪個地方有板,其尺寸是多少 等一下才能繪製板撿料圖 要怎麼看? 通常S開頭的編號,就是板編號(Slab) 以下圖為例,S1的範圍為紅框 知道範圍後,可以量測S1板的長短向樑內側之淨跨距 #結構平面圖 #板 #教學
1,7790
- 2016年6月20日
- 1 分鐘
鋼筋撿料的法規-初步認識標準圖
鋼筋撿料,並不是這邊愛擺幾根鋼筋就擺幾根,鋼筋愛怎麼搭接就怎麼搭喔!鋼筋撿料的原則,要參考「標準圖」。 (一)搭接 什麼是搭接,參考這篇。 搭接的位置和長度,都受法規的限制。原因是因為,根據鋼筋位置不同的應力行為,搭接位置和長度都會有所不同。...
12,1300
- 2016年6月15日
- 1 分鐘
什麼是鋼筋撿料(三)初步認識板撿料圖
和前兩章一樣,這個單元只是初步介紹,帶各位認識 到底什麼是板檢料圖 圖上的綠線代表上層鋼筋 圖上的紅線代表下層鋼筋 中間粗線段代表搭接處 下圖為 「上層鋼筋」採取【與相鄰板鋼筋連通】 「下層鋼筋」採取【單板配筋原則】 #板 #基礎 #幼幼班 #教學
2,1220
- 2016年6月15日
- 2 分鐘
什麼是鋼筋撿料(二)初步認識樑撿料圖
要會畫撿料圖之前,首先要先看得懂撿料圖! 就像要寫小說之前,先要看得懂小說! (怎麼覺得這個比喻好像怪怪的...@@) 總之總之,讓我們來看看樑撿料圖吧! (我是工程人不是作家啊...@@) A. 台號: 樑的單位是一根,例如上圖有兩根樑,分別是3G2和3G2-4...
5,1070
- 2016年6月15日
- 1 分鐘
什麼是鋼筋撿料(一)
要了解什麼是鋼筋撿料,首先要先了解以下專有名詞的意義。 雖然說「專有名詞」四個字光用聽的就覺得很嚴肅很難... 不過這邊只是非常簡單的說明而已~別擔心! 【專有名詞】 A. 結構圖:結構技師畫的圖,包含: a. 結構平面圖 每一層的樑柱板牆等項目,的位置和編號 b. 配筋圖...
5,3670